top of page
Abstract Surface

UV-C Luminaires and disinfection range

We will create a bespoke disinfection design, choosing the right products and installation for your location.

Signify and Boston University validate effectiveness of Signify’s UV-C light sources on inactivating the virus that causes COVID-19. Click here to read the research. 

Stand alone UV-C Disinfection unit

The UV-C disinfection air unit is a powerful and effective way to disinfect circulating air. It draws air into the unit where UV-C radiation inactivates up to 9O% of micro-organisms in 8Om" within just 2 hours (circular coverage 28m*). With no need for mounting, the free-standing unit can be wheeled into place in a wide range of professional  applications, from offices and retail to hospitality. The aesthetic design delivers well-controlled UV-C  radiation (RGO) and can also be used when people are present.

Philips UVC disinfection air unit
  • UV-C is contained within the unit to restrict exposure to room occupants.

  • User friendly interface to simplify the operation of the unit.

  • Easy maintenance to ensure continued use.

  • Sturdy, modern and non-intrusive design

  • Can be in operation when people are present

Click here to see the Data Sheet.

Stand alone

Ceiling Mounted UV-C Luminaires

As part of the Philips UV-C disinfection upper air device series, Philips UV-C disinfection upper air ceiling mounted is designed to be installed on false ceilings for the disinfection of air in a wide range of applications. Optimized for low ceiling heights, the UV-C rays are distributed at device level and above. The beam of UV-C rays is controlled by specific reflectors and the louvre design. This allows for the disinfection of the air in a space, while ensuring that day-to-day business activities can continue underneath the area where the device is active.

Philipis Ceiling Mounted UVC Luminaires
  • Optimized for low ceiling heights, the UV-C rays are distributed at device level and above. The beam of UV-C rays is controlled by specific reflectors and the louvre design.

  • This allows for the disinfection of the air in a space, while ensuring that day-to-day business activities can continue underneath the area where the device is active.

Click here to see the Data Sheet.

Ceiling Mounted UVC

Wall Mounted UV-C Luminaires

As part of the Philips UV-C disinfection upper air device series, Philips UV-C disinfection upper air wall mounted unit is designed to be installed on walls for the disinfection of air in a wide range of applications. Optimised for low ceiling heights, the UV-C rays are distributed at device level and above. The beam of UV-C rays is controlled by specific reflectors and the louvre design. This allows for the disinfection of the air in a space, while ensuring that day-to-day business activities can continue underneath the area where the device is active.

Philips Wall Mounted UVC Luminaires

Click here to see the Innovative Bioanalysis Report SARS COVID 2

  •  Optimized for low ceiling heights, the UV-C rays are distributed at device level and above.

  • The beam of UV-C rays is controlled by specific reflectors and the louvre design.

  • This allows for the disinfection of the air in a space, while ensuring that day-to-day business activities can continue underneath the area where the device is activ

Click here to see the Data Sheet.

Wall Mounted UVC

Active Air

The UV-C disinfection active air unit is designed to disinfect the air during day-to- day business activities, without interruption. It can be installed on a wall or on a ceiling in many different types of location, even UV-C sensitive ones.Thanks to ventilators, the air from the room is pulled inside the device, filtered, and then submitted to an intense disinfection thanks to 2x60W UV-C lamps. The air comes out of the UV-C active air unit clean into the room.

UVC Active AIr
Active Air 2

Click here to see the Data Sheet.

Active Air

Mini Chamber

Philips UV-C disinfection mini chamber (UVCC090) provides the perfect solution to disinfect small belongings, shared devices or objects touched by numerous people, such as a mouse, keyboard, headsets and remote controls. Simply place objects into the mini chamber, then set the timer for exposing the objects to UV-C light with the recommended disinfection scheme. The UV-C disinfection mini chamber can be (re)placed into many different areas, due to its lightweight. With the design and its portable size you are providing a unique disinfecting solution to offer additional protection to your customers, guests and employees in multiple areas in hospitality, office and retail space. This UV-C disinfection chamber is not approved and/or certified as a medical device.

  • Delivers 4-log disinfection rate up to 99.99% to ensure high effectiveness.

  • Easy to use touch panel to set and control disinfection time.

  • Includes safeguards to prevent UV-C exposure due to accidental door opening.

  • Designed to disinfect all surfaces of the object with UV-C radiation coverage, thanks to embedded highly reflective metal plate.

  • Philips 253.7nm UV-C tube emits no ozone during the operation.

  • Size 470 x 440 x 400mm - 48 litres.

Philips Mini Chamber

Click here to see the Data Sheet.

Mini Chamber
Anchor 1

UVC Trolley

The UV-C trolley with one or two-arms version is designed to disinfect professional surfaces within a coverage of up to 36m² of circular coverage area, or 20m² of square area. In laboratory testing, signify's UV-C light sources reduced SARS-CoV-2 virus infectivity on a surface to below detectable levels in as few as 9 seconds. 

Safety features, like remote control, voice alarm and key locks, are integrated to operate the trolley safely. With the 360° wheels, UV-C trolley is a flexible solution as it can be easily and quickly replaced and repositioned in a room/space. The UV-C radiation of the trolley disinfects with listed timeslot and offers a great variety for options of lamp directions and disinfection durations.

Click here to see the Data Sheet.

UVC disinfection trolley

UV-C Disinfection Batten

The UV-C batten is designed for the disinfection of surfaces and is suitable for a wide range of applications. The UV-C batten provides universal UV-C irradiance with homogenous distribution. Its disinfection capability is based on wattage used and aspecific exposure time for a given distance from that surface. No person should be present at the time of usage, due to high risk of harm to eyes and skin. The performance is enhanced by a highly-reflective and durable aluminum body, which improves its efficacy even further and directs the UV-C light to the to-be-irradiated surfaces. The lamp holders and end caps are protected against UV-C thanks to dedicated shielding. There is a 1- and 2-lamp version available, for both the bare batten and reflector batten. This offers an even greater flexibility.

  • Lamp configurations possible: 1-lamp or 2-lamps version

  • Available with or without reflectors

  • Philips T8 TUV lamp included: 18W or 36W

  • Shortwave UV radiation peak at 253.7 nm (UVC)

  • High reflective aluminum housing for better reflectivity and performance

  • All plastic components are protected by dedicated UV-C shielding

  • Various mounting options

  • Complies with all applicable regulations and standards

Click here to see the Data Sheet.

UVC Disinfection Batten
UV-c Batten

UV Solutions Australia delivers disinfection design, installation and service based around the Philips Lighting UVC range of products .

Disinfection services:​

  • Disinfection advice and planning

  • Lighting (disinfection) design

  • Disinfection lighting installation

  • Philips UVC Luminaire range

UVC Solutions full logo

1300 451 363

UV Solutions Australia is an accredited distributor of Philips UV-C Disinfection Range • We are located in sunny QLD • We provide UV-C lighting installations throughout Australia

XSpor Australia

Since our inception, we have focused on identifying the best natural products to provide a safe environment for everyone to live, work, and play. Our products offer significant advantages over the competition due to their non-toxicity and the long-term safety benefits of our enzyme-base cleanser, EnzyCleanse.

​

Since then, we've continued our commitment to developing mould removers, disinfectants, and other products powered by nature.

EnzyCleanse Logo footer
is brought to you by
Xspor Logo
Contact Us
1300 029 141

For Press Comments

For Australian & NZ Press comments contact Graeme on 0418956027

bottom of page